In Reply to: Q;decent but affordable (under$200) rack/stand posted by mmg_fan on March 13, 2007 at 08:38:47:
You could put together Ken Lyons *LackLyte* rack
I borrowed the PIC from a dan.boz postIKEA*lyte Modular Component Isolation Support
It looks great, is customizable, and has good vibration control properties
Basicly it uses the Lack side table( Birch Lack Table )with the legs cut to the height desired(can be done by your local cabinet shop), spikes installed(inexpensive from Madisound) and each shelf is spiked to the one below.
I understand that the wood finish choices of the Lack table have solid legs and the colored finishes legs are hollow, so stay away from the painted Lacks
I chose to use spike protectors to keep from piercing the shelf below. It is still very stiff
This could easily be the best cost/performance rack you can own
Julien
"There's someone in my head, but it's not me"
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- If you DIY just a little - Julien43 13:18:55 03/13/07 (1)
- Re: If you DIY just a little - illini_skn 20:24:19 03/13/07 (0)