|
Digital Drive Upsamplers, DACs, jitter, shakes and analogue withdrawals, this is it. |
|
|
|
Digital Drive Upsamplers, DACs, jitter, shakes and analogue withdrawals, this is it. |
|
In Reply to: It's probably the focus gain and tracking servos, you'll need an oscilloscope posted by cfb on May 10, 2012 at 14:40:19:
Thank you for the detailed response! I have a scope but it is not a high frequency scope. I should have stated before that the sled mechanism does not appear to be functioning correctly. It is functioning, but seems to be a little clunky. It is also noisy, which I have read is not uncommon with this player. Toshiba came up with a "fix", but I don't know how to verify if it has been done to this player, but I strongly suspect it has not.
Can the spindle motor be replaced by itself, or do you need a whole new sled?
Dave
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: It's probably the focus gain and tracking servos, you'll need an oscilloscope - Crazy Dave 09:27:58 05/11/12 (6)
- Unfortunately Toshiba discontinued supplying many older parts in 2011. - cfb 11:28:11 05/11/12 (4)
- RE: Unfortunately Toshiba discontinued supplying many older parts in 2011. - Crazy Dave 13:35:28 05/11/12 (3)
- PS. Looks like a usable Toshiba spindle motor popped up on ebay in NZ, - cfb 07:49:26 05/12/12 (0)
- If you are interested in the technical side of CD players; here are two books to get you started. - cfb 07:47:02 05/12/12 (1)
- RE: If you are interested in the technical side of CD players; here are two books to get you started. - Crazy Dave 13:51:59 05/14/12 (0)
- Note - Crazy Dave 09:44:57 05/11/12 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
