Home Digital Drive

Upsamplers, DACs, jitter, shakes and analogue withdrawals, this is it.

RE: Teddy Pardo TeddyDac DAC review

Kenzo:

I would almost be willing to gauruntee that your main filter caps are dried out with a P-300 that has not been serviced in ten years. Inspection may,or may not, reveal the problem. Sometimes the caps will be bulging at their tops. When I removed mine, I could shake them and they would rattle!
Unfortunately, the P-300s were specced with capacitors used at the limits of their voltage rating-this combined with the heat generated inside the P-300 leads to the caps drying out.
Get all the elctrolytics replaced, Rick Cullen will also upgrade them to better caps if you like (highly recommended). Remember, the P-300 is essentially a signal generator, with an amplifier output stage, like any amp, it will perform better with better parts (lower noise, better dynamics). It is totally worth spending some money on it, as the general design is very sound, and with new, upgrade capacitors it will perform better than new.
Mention my name when you hear from Cullen Circuits as well.


This post is made possible by the generous support of people like you and our sponsors:
  Kimber Kable  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.