In Reply to: Re: Help! Problem with digital output of DEQ 2496 posted by Julien43 on February 18, 2007 at 18:30:18:
Some manufacturers use pin 2 for positive and pin 3 for negative. (Pin 1 is almost always ground.) Other manufacturers use the reverse for pins 2 & 3. It might be interesting to see if your connection improves if you switch pins 2 & 3 at (only) one end of the cables. If you're using commercial manufactured cables, you might want to experiment with a set of homemade cables first. You should be able to find the connectors and cable for $25 or so.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Help! Problem with digital output of DEQ 2496 - mls-stl 15:25:40 02/19/07 (0)