In Reply to: Need digital IC recommendations posted by bartc on November 27, 2006 at 09:45:13:
Here's a recipetake a twisted pair from a length of cat 5 ..fit neutrik nys plugs.
this should cost less than $10 if you can get the 1m of cat5.
alternatively ....
get 2m 0.5mm solid core silver thread it into 2m 1mm id ptfe tube.
fold in half.
clamp one end say the two loose ends, using a hand drill spin the wire up tightly ...be careful as you realse it doesn't escape as it untensions.snip the looped end
then fit neutric nys plugs ....
you can buffer the cable to mimick 75ohms or use a pulse transformer.
this should not cost more than $30
contact me if your strugling to get the bits.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Need digital IC recommendations - zanash 23:46:18 11/27/06 (4)
- This one gets my interest - bartc 05:52:34 11/28/06 (3)
- If you go with 75 ohm... - Ozzie 11:07:45 11/29/06 (2)
- a perfect cable for an imperfect transmission line? - Quiet Earth 21:22:37 11/29/06 (0)
- Re: If you go with 75 ohm... - bartc 14:58:33 11/29/06 (0)