Dayton RCAs with 89259/89248 ICs ?

Cable Asylum

Interconnects, speaker wire, power cords. Ask the Cable Guys.

209.240.216.102

Has anyone made the Jon Risch DIY ICs (twisted pair with braided copper shield) using the Dayton RCAs that Sean so gratiously obtained for some members?I can't figure out the best way to connect the ground. There is only one attachment point (a small set-screw through the barrel,which has about an 8mm I.D.).It seems to me that the set-screw tightened into the braid would be questionable,at best.The only thought I have is to remove the screw and use it's hole as a solder point.Anyone have any thoughts on this? Thanks!!!

This post is made possible by the generous support of people like you and our sponsors:

Kimber Kable

Topic - Dayton RCAs with 89259/89248 ICs ? - Fred Rule 07:37:43 05/03/00 (2)

Assembly notes on DIY interconnects - Sean 21:59:29 05/04/00 (1)

Re: Assembly notes on DIY interconnects - Fred Rule 07:07:28 05/05/00 (0)

You can not post to an archived thread.