In Reply to: Re: Compare with today's high technology... posted by Jon Risch on June 18, 2003 at 21:03:29:
""This is the fundamental difference bewteen audio and these very high frequency signals. Sheer frequency is not the only factor,""JRYou are partially incorrect..(here, I should say your lack of experience is all too apparent, but that of course, would be an insult, which the moderator would have to deal with, as that violates forum rules.)
The main fundamental difference for non modulated signals IS the sheer frequency..
Audio is significant not only for the dynamic range, distortion levels allowed, and noise floor issues, as you correctly pointed out...It is one of the few applications which span three decades of frequency, and that span covers the threshold where skinning takes effect.. Higher frequency applications do not have to worry about skinning other than for resistance..speaking of the conductor only. The difference between gigahertz and terahertz will basically be the surface finish of the wire. (no dielectric talk here..)
""and once again, your lack of exprience with these matters is all too apparent""JR
Why don't you stop with the insults???
TTFN, John
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Compare with today's high technology... - jneutron 06:52:03 06/19/03 (0)