In Reply to: Did you measure the Ground circut resistance posted by pmkap on August 28, 2001 at 05:17:08:
The ground connection between the plugs was (is) N/C. There was absolutely NOTHING connected to either ground prong on either connector.There is NO ground wire or shield. Just the two copper strips stuffed into the PVC tubes.
The copper strips are 0.1mm thick and 30mm wide. That's a cross section of 3mm2 which according to my wire conversion table is half way between 12 and 13awg so call it "12.5awg". This in turn was cut down to a "tongue" 4mm wide to attach to the connectors. That's .4mm2 or 21awg (I initially guessed 18awg).
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Did you measure the Ground circut resistance - garth 06:34:02 08/28/01 (0)