Home Cable Asylum

Interconnects, speaker wire, power cords. Ask the Cable Guys.

RE: Speaker cable suggestions......been a while

Hi NuWave, perhaps another solid core bare copper speaker cable, with a similar aggregate gauge as the AQ Type 4, but this time with smaller AWG conductors for zero audible skin effect, and a completely different geometry and sonic signature. Wireworld cables feature a spiraled ribbon cable, and is tuned/voiced for the best tonality the designer decided upon for general use. It features a slightly smaller cross section of 16 AWG vs. 15 AWG of the AQ Type 4, so if your Vandys perform well with a cable that avoids notable voltage drop, but not instantaneous high-current demand as a prerequisite, the Wireworld Stream 8 Speaker Cable is $9 per meter, and if you wish to build a set of external bi-wire cables, you'll need to purchase enough bulk cable to run two cables for each speaker, one for the high posts and one for the low posts; a total of four cables for use with a pair of bi-wire ready loudspeakers. I suggest covering the cables with 3/8" Techflex braided sleeving.

https://www.partsconnexion.com/WWORLD-86416.html

https://www.partsconnexion.com/CONNEX-79690.html

https://www.partsconnexion.com/SLEEVE-62402.html



Edits: 03/19/21

This post is made possible by the generous support of people like you and our sponsors:
  K&K Audio / Lundahl Transformers   [ K&K Audio / Lundahl Transformers Forum ]


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.