Home Cable Asylum

Interconnects, speaker wire, power cords. Ask the Cable Guys.

Re: I may be mistaken, but....

Many thanks for all your help Jeff. I will try all that out tomorrow and see how I get on. I understand your instructions exactly now. thanks for going into so much detail. It was lucky you had a similar set up. Someone on the Vinyl Asylum recommended this way of wiring Step up to Phono Stage to me as well but I didn't understand it properly until now.

The other thing now is: How should I configure the cable from the phono stage to preamp?

1. Should I try to use Musiflex cable in the way that it is configured in the picture Duster posted? If so which end should have the drain wire(connect to shield) soldered to the RCA collar.

2. As per 1. but shield connected to both collars?

3. Should I try the way SF TECH suggested and use the 2 bare twisted insulated wires from my Musiflex cable after carefully cutting off outer casing/shielding/drain wire

3. Other? Why and how do you use a microphone cable with four insulated wires for the phono stage to preamp cable?!!!!



This post is made possible by the generous support of people like you and our sponsors:
  The Cable Cooker  


Follow Ups Full Thread
Follow Ups


You can not post to an archived thread.