Home Cable Asylum

Interconnects, speaker wire, power cords. Ask the Cable Guys.

I really like the DH Lab Cable...and the other changes I've made

I didn't do extensive A/B tests and it may be psychological bias but I think I much prefer the DH cable unshielded. I can't put my finger on it but the standard shielded 12 gauge I created seemed to be a little "sterile" - not bright but not involving. It seems to me the DH Labs cable (no shield) added a touch of warmth and seemed more natural. Not sure if that makes any sense. Not a night and day, knock your socks off difference and as I mentioned I didn't do much swapping. But very noticable to me.

I think all of these small differences really add up. Changes to my power supply/distribution in the last month have included:

1. Replaced the standard wall outlet with a Hospital Grade Isolated Ground Cooper outlet (from Lowes) - I know, not the end all in outlets but it was a cheap tweak.

2. Added a PS Audio UPC-200 to provide non-current limiting conditioning for my Sunfire 300 Amp and Musical Fidelity A3.2CR Preamp.

3. Replaced the stock Musical Fidelity pre cord with a Volex 17604.

4. Replaced my cheesy keychain RF remote on/off switch between the Sunfire and UPC-200 with a DIY manual switchbox using DH Lab Cable.

5. Replaced the stock UPC-200 cable with a shorter DIY DH Lab Power cable.

Done for now, at least until I can't resist the urge to swap out the stock Sunfire power cable with a DH Labs replacement. And not to forget running a dedicated 20 amp line (my listening room has it's own 15 amp line so I'm in pretty good shape). It NEVER ends...


This post is made possible by the generous support of people like you and our sponsors:
  Analog Engineering Associates  


Follow Ups Full Thread
Follow Ups
  • I really like the DH Lab Cable...and the other changes I've made - Rich Stone 12:35:36 01/03/07 (0)


You can not post to an archived thread.