HTTP/1.0 200 OK Content-type: text/html

Can't connect to database, trying again....HTTP/1.0 200 OK Content-type: text/html

Can't connect to database, trying again.... Re: Use of Teflon Rope for spacer - Jon Risch - Cable Asylum

Home Cable Asylum

Interconnects, speaker wire, power cords. Ask the Cable Guys.

Re: Use of Teflon Rope for spacer

I recommend Kester 63/37, with the 44 flux, this solder is hard to beat both sonically and for good sloder joints every time. But the Wellbourne is a good solder, and if you are used to using it, you should be able to make a good joint, the 2% silver solders can be a little peckish to work with, even with all the right tools and temperatures.

However, if you can pick up a small quantity of the Kester 63/37 with the 44 flux, try it and see what you think. Kester also makes a silver solder, a 62/37/2 alloy, with the 44 flux, and this is also an excellent solder, just a bit harder to work with, as already noted.
Jon Risch


This post is made possible by the generous support of people like you and our sponsors:
  Schiit Audio  


Follow Ups Full Thread
Follow Ups
  • Re: Use of Teflon Rope for spacer - Jon Risch 19:36:04 11/28/06 (1)


You can not post to an archived thread.