In Reply to: RE: I found your IC but since you have the schematic. posted by stushug on February 28, 2017 at 13:15:13:
Then the 19khz signal is still present.One time on a pioneer SX-850,I had a similar problem and it turned to be a bad spot in the stereo threshold adjustment.I ended up changing the pot with a Bournes PC trim pot.
See if you have a stereo threshold adjustment.I wish I had a better copy of your schematic and a breakdown of the IC..
Was your IC new you put in or was it a pull? They sell both on Ebay I see,
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: I found your IC but since you have the schematic. - Michael Samra 17:21:44 02/28/17 (3)
- RE: I found your IC but since you have the schematic. - stushug 18:53:06 02/28/17 (1)
- RE: I found your IC but since you have the schematic. - Michael Samra 19:42:27 02/28/17 (0)
- RE: I found your IC but since you have the schematic. - stushug 18:49:06 02/28/17 (0)