In Reply to: RE: my regulator isn't regulating posted by Blackdog on May 21, 2020 at 14:52:47:
Thanks for responding. I suspected that I had somehow fried the MOSFET while I was troubleshooting the regulator. I rebuilt it with a new IRF840 and new resistors. I also reduced the 18200 ohm resistor feeding the zener string with a 2200 ohm resistor to draw more current through the zeners. I also added a diode between the drain and gate. This seems to have worked. I am now getting 304 volts out. We'll see if it keeps working. Wish me luck.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: my regulator isn't regulating - floydandrews 17:46:01 05/22/20 (0)