I've been making valid comments.

Follow Ups Full Thread

Topic - 813 set schematic - vinnie2 09:12:26 02/10/19 (127)

update 2 - vinnie2 11:49:35 02/15/19 (49)

RE: update 2 - deafbykhorns 03:46:40 02/17/19 (44)

RE: update 2 - vinnie2 03:59:41 02/17/19 (43)

RE: update 2 - deafbykhorns 12:14:49 02/17/19 (42)

RE: update 2 - vinnie2 12:45:09 02/17/19 (41)

RE: update 2 - deafbykhorns 17:57:09 02/17/19 (40)

RE: update 2 - vinnie2 13:54:06 02/18/19 (38)

RE: update 2 - cpotl 16:16:32 02/18/19 (37)

RE: update 2 - vinnie2 18:14:21 02/18/19 (36)

RE: update 2 - cpotl 19:57:17 02/18/19 (35)

RE: update 2 - vinnie2 04:58:32 02/19/19 (34)

RE: update 2 - cpotl 06:07:46 02/19/19 (0)

RE: update 2 - cpotl 05:40:56 02/19/19 (32)

RE: update 2 - vinnie2 07:00:18 02/19/19 (31)

RE: update 2 - deafbykhorns 15:15:55 02/20/19 (30)

RE: update 2 - Tre' 10:12:50 02/22/19 (0)

much better! - vinnie2 06:21:16 02/22/19 (24)

RE: much better! - cpotl 08:42:38 02/22/19 (23)

RE: Sample Sine Wave - deafbykhorns 11:28:41 02/22/19 (20)

845 op points - vinnie2 06:19:57 02/23/19 (0)

RE: Sample Sine Wave - vinnie2 05:02:59 02/23/19 (15)

RE: Sample Sine Wave - deafbykhorns 16:51:37 02/23/19 (14)

RE: Sample Sine Wave - vinnie2 17:56:28 02/23/19 (13)

RE: Grid Current - deafbykhorns 14:56:39 02/24/19 (7)

RE: Grid Current - vinnie2 17:59:00 02/24/19 (6)

RE: Grid Current - deafbykhorns 06:00:36 02/25/19 (5)

RE: Grid Current - vinnie2 06:44:26 02/25/19 (4)

RE: Try the 300B with a good DHT - deafbykhorns 07:54:02 02/25/19 (3)

RE: Try the 300B with a good DHT - vinnie2 09:19:20 02/25/19 (2)

RE: Try the 300B with a good DHT - deafbykhorns 13:01:02 02/25/19 (1)

thanks! nt - vinnie2 13:59:12 02/25/19 (0)

what are the 6sn7 op points? (nt) - Tre' 06:53:46 02/24/19 (4)

RE: what are the 6sn7 op points? (nt) - vinnie2 14:45:14 02/24/19 (3)

RE: what are the 6sn7 op points? (nt) - Tre' 18:02:17 02/25/19 (2)

RE: what are the 6sn7 op points? (nt) - vinnie2 04:31:51 02/26/19 (1)

RE: what are the 6sn7 op points? (nt) - cpotl 05:07:07 02/26/19 (0)

good post (nt) - Tre' 14:06:08 02/22/19 (0)

RE: Sample Sine Wave - vinnie2 11:40:25 02/22/19 (1)

RE: Sample Sine Wave - Tre' 14:05:06 02/22/19 (0)

Good point. - Tre' 10:43:36 02/22/19 (0)

RE: much better! - vinnie2 09:56:27 02/22/19 (0)

RE: update 2 - vinnie2 06:23:22 02/21/19 (2)

RE: Example - deafbykhorns 12:38:17 02/21/19 (0)

RE: update 2 - cpotl 08:29:18 02/21/19 (0)

RE: update 2 - vinnie2 17:54:53 02/20/19 (0)

RE: update 2 - vinnie2 06:45:38 02/18/19 (0)

my suggestion - Jim Dowdy 12:22:25 02/16/19 (3)

RE: my suggestion - vinnie2 12:47:58 02/16/19 (2)

RE: my suggestion - Jim Dowdy 12:59:46 02/16/19 (1)

RE: my suggestion - vinnie2 04:04:39 02/17/19 (0)

update.... - vinnie2 14:57:38 02/12/19 (33)

confused again - vinnie2 06:28:42 02/13/19 (21)

RE: confused again - JKT 17:57:02 02/13/19 (3)

Not Quite - Triode_Kingdom 19:24:29 02/13/19 (1)

RE: Not Quite - JKT 19:53:45 02/13/19 (0)

RE: confused again - vinnie2 17:58:34 02/13/19 (0)

RE: confused again - Caucasian Blackplate 09:12:37 02/13/19 (16)

RE: confused again - vinnie2 15:23:36 02/13/19 (1)

RE: confused again - JKT 09:54:58 02/15/19 (0)

RE: confused again - vinnie2 13:29:54 02/13/19 (13)

RE: confused again - Caucasian Blackplate 15:17:18 02/13/19 (12)

RE: confused again - vinnie2 15:24:44 02/13/19 (11)

RE: confused again - Caucasian Blackplate 15:25:29 02/13/19 (10)

RE: confused again - vinnie2 15:36:38 02/13/19 (9)

RE: confused again - Caucasian Blackplate 15:40:30 02/13/19 (8)

Boy howdy,that really made a difference! - vinnie2 06:42:37 02/14/19 (6)

RE: Boy howdy,that really made a difference! - JKT 08:34:21 02/14/19 (5)

RE: Boy howdy,that really made a difference! - vinnie2 08:53:30 02/14/19 (4)

RE: Boy howdy,that really made a difference! - Tre' 07:47:40 02/15/19 (3)

RE: Boy howdy,that really made a difference! - vinnie2 11:57:20 02/15/19 (2)

RE: Boy howdy,that really made a difference! - Tre' 14:49:11 02/15/19 (1)

RE: Boy howdy,that really made a difference! - vinnie2 15:07:00 02/15/19 (0)

RE: confused again - vinnie2 17:54:34 02/13/19 (0)

Big difference on input sensitivity - DAK 18:44:28 02/12/19 (10)

RE: Big difference on input sensitivity - Triode_Kingdom 07:55:00 02/13/19 (8)

The RCA tube manual gives no info on triode mode - DAK 09:48:05 02/13/19 (7)

Apples and Oranges - Triode_Kingdom 19:09:22 02/13/19 (2)

RE: Apples and Oranges - Tre' 20:35:41 02/13/19 (1)

Triode Curves - Triode_Kingdom 21:00:22 02/13/19 (0)

RE: The RCA tube manual gives no info on triode mode - vinnie2 13:32:14 02/13/19 (0)

RE: The RCA tube manual gives no info on triode mode - buffy 10:52:55 02/13/19 (2)

Thanx Buffy, you da man! nt. - DAK 21:57:07 02/13/19 (0)

RE: The RCA tube manual gives no info on triode mode - vinnie2 14:40:38 02/13/19 (0)

RE: Big difference on input sensitivity - vinnie2 03:29:51 02/13/19 (0)

powerdrive - RayP 17:09:49 02/11/19 (1)

RE: powerdrive - vinnie2 17:56:29 02/11/19 (0)

RE: 813 set schematic - Chip647 16:36:59 02/11/19 (1)

RE: 813 set schematic - vinnie2 16:55:34 02/11/19 (0)

RE: 813 set schematic - buffy 14:52:34 02/11/19 (1)

RE: 813 set schematic - vinnie2 16:57:47 02/11/19 (0)

RE: 813 set schematic - buffy 12:08:36 02/11/19 (1)

RE: 813 set schematic - vinnie2 13:51:20 02/11/19 (0)

Aren't the 813 load lines non linear at the voltage? nt - DAK 23:08:13 02/10/19 (9)

RE: Aren't the 813 load lines non linear at the voltage? nt - vinnie2 03:42:52 02/11/19 (0)

Like Vinnie knows that or gives a shit if he does. - Timbo in Oz 01:22:22 02/11/19 (7)

crawl back under your bridge Troll.....nt - vinnie2 03:43:45 02/11/19 (6)

Okay, guys... - FenderLover 06:32:51 02/12/19 (5)

RE: Okay, guys... - vinnie2 07:36:42 02/12/19 (4)

Sometimes, it better to let it go... - FenderLover 07:40:34 02/12/19 (3)

RE: Sometimes, it better to let it go... - vinnie2 11:47:42 02/12/19 (2)

For Tube DIY, that would be me. - FenderLover 13:06:48 02/12/19 (1)

RE: For Tube DIY, that would be me. - vinnie2 14:32:14 02/12/19 (0)

I know it is fun and looks very cool, but - Chip647 16:14:49 02/10/19 (11)

RE: I know it is fun and looks very cool, but - vinnie2 17:43:04 02/10/19 (10)

f'whoop, not at the volts you are rubnning this at! - Timbo in Oz 00:11:02 02/11/19 (9)

RE: f'whoop, not at the volts you are rubnning this at! - vinnie2 09:03:11 02/11/19 (6)

I've learnt enough over the years and am happy with the once were LEAKs. - Timbo in Oz 13:05:20 02/11/19 (5)

RE: I've learnt enough over the years and am happy with the once were LEAKs. - vinnie2 13:54:23 02/11/19 (4)

I've done the DIY I needed to do but only after doing a lot of reading assisted and guided by older techies. - Timbo in Oz 14:03:47 02/11/19 (3)

RE: I've done the DIY I needed to do but only after doing a lot of reading assisted and guided by older techies. - vinnie2 17:00:54 02/11/19 (2)

I've been making valid comments. - Timbo in Oz 18:05:32 02/11/19 (1)

RE: I've been making valid comments. - vinnie2 04:04:39 02/12/19 (0)

RE: f'whoop, not at the volts you are rubnning this at! - Triode_Kingdom 07:46:37 02/11/19 (1)

Farting about, and learning SFA. - Timbo in Oz 13:07:16 02/11/19 (0)

RE: 813 set schematic - Caucasian Blackplate 15:28:37 02/10/19 (1)

RE: 813 set schematic - vinnie2 17:46:30 02/10/19 (0)

RE: 813 set schematic - PakProtector 15:10:39 02/10/19 (8)

RE: it's a 12BZ7 these days ... - deathtube 667 09:37:36 02/12/19 (5)

RE: it's a 12BZ7 these days ... - PakProtector 18:31:21 02/12/19 (4)

RE: it's a 12BZ7 these days ...says DF - deathtube 667 20:22:07 02/12/19 (3)

Good... - PakProtector 17:33:37 02/14/19 (2)

RE: Good... - deathtube 667 03:04:06 02/15/19 (1)

RE: Good... - PakProtector 10:08:53 02/16/19 (0)

RE: 813 set schematic - vinnie2 17:38:08 02/10/19 (0)

Do I detect a bit of nostalgia? (nt) - Chip647 16:25:41 02/10/19 (0)

RE: 813 set schematic - Tre' 10:20:21 02/10/19 (1)

RE: 813 set schematic - vinnie2 11:10:08 02/10/19 (0)

Follow Ups

I've been making valid comments. - Timbo in Oz 18:05:32 02/11/19 (1)

RE: I've been making valid comments. - vinnie2 04:04:39 02/12/19 (0)

Post a Message!