Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tube DIY Asylum ]

---

[ Alert Moderator ]

---

RE: Maybe use short threaded standoffs?

Posted by 91derlust (A) on July 18, 2017 at 02:09:00

In Reply to: Maybe use short threaded standoffs? posted by FenderLover on July 18, 2017 at 01:28:30:

Good idea.

Thinking while I type: The snag is that because I am using powder coat on both sides of the cage and chassis, at no point would bare metal on the cage connect with bare metal on the chassis, either directly or via the stand-off. To achieve continuity I'd need to scrape off some paint... but I guess with stand-offs, the bare metal could be on the under-side of both...

Not ideal, but a real possibility. Thanks!

Cheers,
91.

"Confusion of goals and perfection of means seems to characterise our age." Albert Einstein

Edits: 07/18/17

This post is made possible by the generous support of people like you and our sponsors:

Parts Connexion

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---