|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Antique Sound Lab Hurricane Marl II Amps posted by BE on July 3, 2017 at 18:08:14:
I'd remove each tube and clean the pins and sockets with a little contact cleaner. I like Caig Deoxit. Work the tubes in and out of the sockets to issue good contact.
You may need to tighten the socket tangs, if any have loosened-up.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Antique Sound Lab Hurricane Marl II Amps - FenderLover 18:13:01 07/03/17 (5)
- Also, look for weakened or broken solder joints,... - Lew 18:39:48 07/03/17 (4)
- RE: Also, look for weakened or broken solder joints,... - Triode_Kingdom 06:03:44 07/04/17 (3)
- True, I guess, - Lew 10:45:48 07/04/17 (0)
- RE: Also, look for weakened or broken solder joints,... - BE 06:59:59 07/04/17 (1)
- RE: Also, look for weakened or broken solder joints,... - FenderLover 07:08:23 07/04/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
