I wanted to monitor the current of the power tubes and wonder if i just hookup one lead from the cathode to the meter and from the other screw post on the meter to ground? It is a used meter so no instructions. thanks for the help, Dak
This post is made possible by the generous support of people like you and our sponsors:
Topic - Installing a current meter.. - DAK 13:24:13 06/18/17 (34)
- Most meters go full scale at 0.2 Volts - Chip647 19:48:47 06/18/17 (6)
- RE: My meter is scaled to 200 ma. - DAK 02:51:02 06/19/17 (5)
- RE: My meter is scaled to 200 ma. - Triode_Kingdom 07:08:19 06/19/17 (3)
- RE: My meter is scaled to 200 ma. - Chip647 08:06:10 06/20/17 (2)
- RE: My meter is scaled to 200 ma. - Triode_Kingdom 10:05:17 06/20/17 (1)
- RE: My meter is scaled to 200 ma. - Chip647 12:47:19 06/20/17 (0)
- RE: My meter is scaled to 200 ma. - Chip647 05:58:48 06/19/17 (0)
- RE: Installing a current meter.. - Johno 17:55:20 06/18/17 (1)
- RE: Installing a protection fuse. - Johno 21:52:37 06/18/17 (0)
- RE: Installing a current meter.. - Uncle Mike 16:25:30 06/18/17 (0)
- RE: Depends on what kind of meter you have - deafbykhorns 14:47:25 06/18/17 (7)
- RE:I have a 200ma Fluke or something like that. - DAK 16:55:51 06/18/17 (6)
- RE:I have a 200ma Fluke or something like that. - SteveBrown 07:23:40 06/19/17 (5)
- That seems like a good idea - DAK 09:18:11 06/19/17 (4)
- RE: That seems like a good idea - SteveBrown 22:27:22 06/28/17 (0)
- RE: Depends on how it's biased - deafbykhorns 18:09:35 06/19/17 (1)
- RE: Depends on how it's biased - SteveBrown 08:12:02 06/20/17 (0)
- RE: That seems like a good idea - SteveBrown 17:59:27 06/19/17 (0)
- RE: Installing a current meter.. - vinnie2 13:54:34 06/18/17 (15)
- disregard this post bad info.......... - vinnie2 18:34:54 06/18/17 (0)
- RE: Installing a current meter.. - DAK 16:38:53 06/18/17 (13)
- RE: Installing a current meter.. - Tre' 17:34:18 06/18/17 (12)
- RE: Installing a current meter.. - Stuben 07:16:08 07/02/17 (1)
- RE: Installing a current meter.. - Tre' 08:34:49 07/04/17 (0)
- What about the audio aspect of having the meter in the signal chain? - DAK 09:03:14 06/19/17 (9)
- RE: What about the audio aspect of having the meter in the signal chain? - Tre' 12:18:06 06/19/17 (8)
- RE: Good idea - DAK 12:34:37 06/19/17 (7)
- RE: Good idea - Tre' 15:52:46 06/19/17 (6)
- What about a rotary switch. - DAK 18:40:36 06/19/17 (5)
- RE: What about a rotary switch. - Tre' 19:31:44 06/19/17 (4)
- You guys are making this way too hard! - Triode_Kingdom 22:14:37 06/19/17 (3)
- how do i measure both channels - DAK 10:32:25 06/20/17 (1)
- RE: how do i measure both channels - Triode_Kingdom 12:00:18 06/20/17 (0)
- Doh (nt) - Tre' 07:35:34 06/20/17 (0)