In Reply to: RE: Metallized caps where space is tight? posted by Michael Samra on March 25, 2017 at 00:45:58:
I need a 0.1uF 600V capacitor, and the PCB holes are 20mm apart. It's between the input gain stage and the LTP PI/driver of a Dyna MkIII-based amp. The PCB is crowded, so there's not much room to work.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Metallized caps where space is tight? - Thermionic27609 08:27:36 03/25/17 (19)
- Is there room in the vertical direction,.. - Lew 08:29:22 03/26/17 (14)
- RE: Is there room in the vertical direction,.. - Thermionic27609 08:50:02 03/26/17 (13)
- RE: Is there room in the vertical direction,.. - Lew 14:19:23 03/26/17 (12)
- RE: Is there room in the vertical direction,.. - Eli Duttman 15:04:17 03/26/17 (11)
- We don't disagree... - Lew 17:33:08 03/26/17 (10)
- Metallized caps require significant break-in time... - Interstage Tranny 19:51:04 03/26/17 (9)
- RE: Metallized caps require significant break-in time... - Thermionic27609 13:52:38 03/27/17 (6)
- RE: Metallized caps require significant break-in time... - Eli Duttman 14:27:21 03/27/17 (5)
- RE: Metallized caps require significant break-in time... - Thermionic27609 15:51:32 03/27/17 (4)
- RE: Metallized caps require significant break-in time... - Steve O 17:26:26 03/27/17 (3)
- RE: Metallized caps require significant break-in time... - Michael Samra 17:49:25 03/27/17 (2)
- RE: Metallized caps require significant break-in time... - Thermionic27609 18:30:43 03/27/17 (1)
- OK... - Steve O 18:45:49 03/27/17 (0)
- RE: Metallized caps require significant break-in time... - Eli Duttman 11:59:12 03/27/17 (0)
- RE: Metallized caps require significant break-in time... - amnesiac 02:23:30 03/27/17 (0)
- RE: Metallized caps where space is tight? - Eli Duttman 16:37:23 03/25/17 (0)
- Sprague 716P - Chip647 08:58:33 03/25/17 (2)
- RE: Sprague 716P - Thermionic27609 09:39:05 03/25/17 (1)
- Sprague 715P and 716P are Epoxy Coated, Heat Resistant... - Interstage Tranny 19:52:43 03/26/17 (0)