In Reply to: RE: Some Advice... posted by jpirroni3@comcast.net on July 18, 2012 at 19:50:24:
If you do put a 10ohm cathode resistor on each output tube, the voltage reading across EACH 10 ohm resistor should be HALF of what it was when both tubes shared the same resistor.
This is important as you could grossly over bias the tubes if you don't remember this.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Just keep in mind... - gusser 10:19:39 07/19/12 (0)