In Reply to: RE: "Number 2 means use all windings for full current capacity." posted by 1973shovel on May 18, 2012 at 19:50:32:
1&5 will be one leg of the primary and 2&6 will be the other leg of the primary. Same for 7&11 and 8&12 for the secondary.
From there, follow the Hammond setup.
If the voltage goes down, you've bucked the tranny.
If the voltage goes up, you've boosted it. Flip the secondary leg to primary connection and the voltage will go down.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: "Number 2 means use all windings for full current capacity." - wheezer 22:40:00 05/18/12 (2)
- RE: "Number 2 means use all windings for full current capacity." - Wojciech 08:43:12 05/23/12 (1)
- RE: "Number 2 means use all windings for full current capacity." - wheezer 12:40:35 05/23/12 (0)