In Reply to: Anything to be gained or loss by two chokes in series vs. one in PS? posted by Paully on May 14, 2012 at 14:42:46:
I believe a power supply should have less than 120 ohms resisistance including the chokes, transformer secondary & tube rectifiers feeding an amp requiring 100-140ma current at idle (no signal input). I design for a 50% current increase with 16ms voltage recovery. I hear no difference when compared to ultimate shunt regulated designs. I am also referring to SET amps that are more critical than class A push-pull amps.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Anything to be gained or loss by two chokes in series vs. one in PS? - Neff 19:59:36 05/14/12 (4)
- That is some interesting stuff - Paully 14:21:14 05/16/12 (0)
- "I design for a 50% current increase" - Chris O 05:45:47 05/15/12 (2)
- RE: "I design for a 50% current increase" - danlaudionut 09:09:46 05/15/12 (1)
- RE: "I design for a 50% current increase" - Chris O 11:37:03 05/15/12 (0)