|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
|
|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
In Reply to: recording only one side in 1/4 track config posted by joey1127 on March 14, 2016 at 09:01:08:
There were a couple of Barclay-Crocker releases back in the 70's that used that same format.
Those were particularly dynamic recordings and the idea was to eliminate any crosstalk between the "sides".
As you probably know the 4 tracks of a 1/4 track recording is;
Side one=track #1 (left channel) track #3 (right channel)
Side two=track #4 (left channel) track #2 (right channel)
Not recording side two provide a much wider "safety gap" between tracks which gets rid of any "ghosting" of the loud passages from side two when side one is playing quiet passages.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: recording only one side in 1/4 track config - ironbut 13:24:22 03/14/16 (1)
- RE: recording only one side in 1/4 track config - joey1127 19:05:49 03/14/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
