63.80.253.3
'); } else { document.writeln(''); } } else { document.writeln(''); } } else { document.writeln(''); } } // End --> |
In Reply to: RE: Factory fabricated board solder? posted by mashley on June 10, 2012 at 13:25:04
It is very possible that if the main PCB was 'wave-soldered' that it used a higher temp solder - and if there are lots of surface mount devices on the PCB then that is almost certainly the case.
a hotter iron - or if you have one of the Weller units with different temp. tips - changing to a higher temp should do the trick.
Happy Listening,
Follow Ups:
Post a Followup: