In Reply to: MA-1 Coupling Cap upgrade posted by Cousin Billy on January 1, 2016 at 12:25:28:
Couldn't find anything quickly and am not familiar with the MA-1 circuit topology but am sure others will chime in.I would change to the copper foil CuTf V-Caps if you are changing them. They are stock in the MA-1 Mk 3.3 and sound noticeably better than the TfTf tin foils you appear to have. I would NOT change the voltage....
Edits: 01/01/16
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: MA-1 Coupling Cap upgrade - Barry 13:36:06 01/01/16 (7)
- CuTF ordered. Thank You - Cousin Billy 10:04:28 01/02/16 (6)
- Opps!, ordered wrong value - Cousin Billy 07:08:11 01/03/16 (5)
- 0.1uf is the right value. - Ralph 11:10:41 01/05/16 (2)
- RE: 0.1uf is the right value. - Lew 05:10:47 01/08/16 (1)
- timing constants - Ralph 08:42:35 01/08/16 (0)
- How critical is the 1K resistor - Cousin Billy 08:46:07 01/03/16 (1)
- RE: How critical is the 1K resistor - Lew 05:06:54 01/08/16 (0)