Home Amp/Preamp Asylum

Looking for a new Amp or Preamp? If you're after tubes, post over here.

RE: cyrus PSX - 120 vs 240

just to tie this up for any other inmates using early cyrus amps, here is what cyrus said:

"The input voltage of the PSX doesn't have any impact on its output voltages, so you can safely connect your PSX to the amp without needing to change the mains input voltage of either unit. If you are using a turntable with the amp, then you will need to have both units connected to power (and through the transformer if different to your native mains supply). If no turntable is being used, only the PSX needs to be connected to the power.

This is different to the more modern PSX-R and PSX-R2 models, which require both units to be connected to mains power at all times."

so excellent to get direct responsive feedback like this from a manufacturer. props to cyrus!

-andre d


This post is made possible by the generous support of people like you and our sponsors:
  Kimber Kable  


Follow Ups Full Thread
Follow Ups
  • RE: cyrus PSX - 120 vs 240 - adaug 18:45:44 08/09/17 (0)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.