In Reply to: RE: Help needed: Tympani IVa midrange driver problem posted by Roger Gustavsson on April 9, 2021 at 00:32:47:
Roger-
Thanks for the photo, very helpful. I just heard back from Gary at Magnepan, and he indicated a slight bow (about 1/8") was typical.
Mine is over twice that, so I plan to do some measurements this weekend comparing the panel as it is now and with some braces holding it closer to flat to confirm that raises the level.
Mike
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Help needed: Tympani IVa midrange driver problem - mikebarney 06:02:52 04/09/21 (6)
- RE: Help needed: Tympani IVa midrange driver problem - Roger Gustavsson 06:35:41 04/09/21 (5)
- RE: Help needed: Tympani IVa midrange driver problem - mikebarney 05:30:51 04/10/21 (4)
- RE: "cross bars at 2 or 3 locations to the rear of the panel" ... - andyr 15:37:10 04/10/21 (3)
- RE: "cross bars at 2 or 3 locations to the rear of the panel" ... - Roger Gustavsson 08:11:19 05/01/21 (1)
- RE: steel ... - andyr 15:34:56 05/01/21 (0)
- RE: "cross bars at 2 or 3 locations to the rear of the panel" ... - mikebarney 05:56:28 04/11/21 (0)