Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Planar Speaker Asylum ]

---

[ Alert Moderator ]

---

RE: External tweeter options for MG-1 w/bad tweeter.

Posted by Kirk57 (A) on July 21, 2020 at 10:42:21

In Reply to: External tweeter options for MG-1 w/bad tweeter. posted by Coner on July 17, 2020 at 16:02:12:

Specs for the MG-1 are here:

http://www.integracoustics.com/MUG/MUG/articles/speakers.html

So depending on which version you have, you will be looking for a tweeter that is flat-ish from 1.6k or 2.4k on up. General rule of thumb is to add an octave to a tweeter's stated frequency response (Fs) to avoid any non-linear behaviour at the bottom of the range.

So you'll want a 4 ohm tweeter that with Fs of about 1k, somewhere in the 83db/W/m range. Of course you could adjust some of this with the crossover but that's a whole 'nother can of worms.

This will likely end up being a larger tweeter...


Happy hunting!

This post is made possible by the generous support of people like you and our sponsors:

Parts Connexion

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---