Do It Yourself (DIY) paradise for tube and SET project builders.
Message Sort: Post Order or Asylum Reverse Threaded
OK, not easy without picture but here goes....
98.60.225.225 |
||
Posted on December 25, 2022 at 08:55:52 | ||
Posts: 48887
Location: Cadiere d'azur FRANCE - Santa Fe, NM Joined: February 26, 2001 |
Got a REALLY nice tube preamp with TWO pairs of RCA outputs (currently wired in parallel). Output is directly off a pair of cathode followers (6AH4) through rather nice sized caps for full frequency response. So I'd like to add a sub to one of the two pair of RCA outs and that would work well as the current series cap is nice and large. But then, my 2A3 monoblocks no longer need anything much below 80Hz (and the Edgar Mid Bass horns don't do anything lower than that anyway) Could I come off those two cathode followers with smaller 'nice' series caps to one pair of RCAs just for the 2A3 Monoblocks and leave the other pair large and 'full range' for the Sub Amp while having the two pair of RCAs connectors no longer wired in parallel? What am I missing (if anything). First they came for the dumb-asses And I did not speak out Because I was not a dumb-ass |
A picture is worth a thousand words , posted on December 25, 2022 at 09:42:28 | |
Posts: 12383
Location: SE MI Joined: September 6, 2001 |
A line diagram (schematic) is worth a thousand pictures. |
Yes and you're not missing anything. nt, posted on December 25, 2022 at 11:36:48 | |
Posts: 17302
Location: So. Cal. Joined: February 9, 2002 |
.
Have Fun and Enjoy the Music "Still Working the Problem" |