Computer Audio Asylum

Music servers and other computer based digital audio technologies.

Return to Computer Audio Asylum


Message Sort: Post Order or Asylum Reverse Threaded

Emotiva dose of LIRPA ;)

206.255.200.176

Posted on April 1, 2021 at 11:00:24
E-Stat
Audiophile

Posts: 37666
Joined: May 12, 2000
Contributor
  Since:
April 5, 2002






View YouTube Video

 

Hide full thread outline!
    ...
Makes sense. Benchmark does SMPS too in the ABH2 amp, posted on April 1, 2021 at 14:37:11
AbeCollins
Audiophile

Posts: 46302
Location: USA
Joined: June 22, 2001
Contributor
  Since:
February 2, 2002
The reasons for using a SMPS as listed in the Emotiva video include:

- More power
- Quieter
- Less Noise
- Better performance and efficiency

What wasn't mentioned is the much lower cost of a SMPS and mandates for higher energy efficiency for products sold in some countries. I'm sure these are big drivers for moving to SMPS as well.

Benchmark ABH2 does SMPS too:
"Resonant Switch-Mode Power Supply - Most high-end power amplifiers use unregulated linear power supplies. The conventional wisdom is that linear supplies are electrically quieter than switching supplies. Benchmark's research shows that this is a myth. Linear supplies have transformers that operate at the AC mains frequency. The problem with these 50 to 60 Hz transformers is that they must be very large in order to supply the required power. These large low-frequency transformers generate large stray magnetic fields that can interfere with other nearby devices, and with the amplifier itself. The noise performance of many traditional power amplifiers is limited by the amplitude of the AC line-related hum. This hum is often magnetically induced and is very hard to eliminate. To solve these problems, Benchmark now uses switching power supplies in all of its newer products. Switching frequencies are set well above the audio band. More importantly, the high switching frequency greatly reduces the size of the magnetic components and the magnitude of the stray magnetic fields. Resonant switching is used in the AHB2 to minimize switching noise. Resonant supplies switch at low voltage and low current and are much quieter than traditional switching supplies."



 

You didn't watch it in time ;), posted on April 1, 2021 at 15:21:42
E-Stat
Audiophile

Posts: 37666
Joined: May 12, 2000
Contributor
  Since:
April 5, 2002
Originally, the link was to an April Fool's video about producing a brand new digital player using 3.5" floppies.

Alas, they pulled it down.

I'm still avoiding inherently high RFI generating power supplies.

edit: I just located it!






View YouTube Video

 

RE: You didn't watch it in time ;), posted on April 1, 2021 at 18:57:59
AbeCollins
Audiophile

Posts: 46302
Location: USA
Joined: June 22, 2001
Contributor
  Since:
February 2, 2002

Ah, I get it now! I liked the knob with different genre selections. I should dig up some old boxes of 3.5" floppies.



 

Pretty much the same message as Emotiva, posted on April 2, 2021 at 09:11:30
Feanor
Audiophile

Posts: 9873
Location: London, Ontario
Joined: June 17, 2003
Contributor
  Since:
March 12, 2004
Class D ICEpower, Hypex, and Purifi amps I've played with recently all have SMPS, not surprisingly, and sound great -- especially the Purifi.



Dmitri Shostakovich

 

Page processed in 0.017 seconds.