|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
70.187.224.126
recently received the analogue labs aluminum body for my denon 103, so I will be mounting the 103 into the body, any recommendations for the type of glue to use to hold the nuded 103 into the aluminum body? thanks
Follow Ups:
I'll check the JB out as I have some around here somewhere...
rocky, what is the bi-composition resin you speak of? Does it have a name that I can use to buy it by? to the earlier question, analogue labs has not emailed me back about the type of glue, that was the first person I tried to contact regarding the type, they did recommend using glue, but not the type to use...
http://www.google.com/search?q=Araldite&hl=fr&client=browser-ubuntu&hs=LST&sa=G&channel=fe&prmd=imvns&tbm=isch&tbo=u&source=univ&ei=Mg_4T9KNFNS6hAe3h-jiBg&ved=0CHIQsAQ&biw=1680&bih=855http://jbweld.net/products/jbweld.php
Araldite is great. JB Weld is just incredible. Takes 24 hrs to set - but once it does - that's the end of it ! I'd pour about 1 mm of JB weld into the shell - press the cart in there & leave it on a flat surface. If it has holes in the body for the bolts - grease the bolts - wipe them off with a tissue - then put them in the holes as far as you can before you use the JBWeld. Once set - just unscrew the bolts & you'll have perfect threads - right into the JB Weld. Perfect !
Edits: 07/07/12
Seems like they should have the best (safest) choice.
"For a nominal service fee,
you can reach nirvana tonight."
I mounted my 103R into a Isokinetik alum. body and used a dab of silicon....
I'd use a bi composition resin like those two. Both are non magnetic. Both will ensure a vibration-proof mount. Both will effectively make the two components into one - for life !
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: