|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
142.197.222.96
In Reply to: RE: Sorry to have created some consternation... posted by Lew on October 11, 2021 at 17:05:44
All values below .1uF? I never seen over 30 years of rebuilding SS amps and receivers using less than 2uF in FM radio coupling sections and never below 5uF every where else.
Follow Ups:
I must be hallucinating, in that case.If it helps you to calm down, this is the solid state input PCB from a Beveridge Audio direct-drive amplifier, which has a tube-based output stage. I have posted the schematic here. I replaced C101, C103, C104, C107, C108 C109, and C110.
Edits: 10/12/21 10/12/21
C109 and C110 are 10uF @ 40 volts.
Yes, I certainly do know that. I replaced the OEM ones with ELNA Silmic II. I have also used Auricap 10uF/400V in that position with success, but I decided to stick with an electrolytic in this amplifier.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: