|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
108.183.73.227
In Reply to: RE: hum from new tube posted by scruffy_ on February 07, 2017 at 14:46:30
Scruffy,Another possibility for the hum could be due to leakage in the 6SN7 you identified as emitting a small amount of hum. Such a tube can work perfectly without any hum in some circuits (such as driver applications) whereas in other circuits while otherwise functioning properly will cause some hum (such as in a gain stage).
Thus if you have such a tube don't assume it is bad and thus dump it. Instead be aware there are applications you can use it that the leakage does not induce the hum.
Per a well-known tube store: You cannot correlate leakage with wear as many new tubes have leakage and obviously no wear. Where leakage is a serious problem relates primarily to applications higher than the audio frequency range.
Edits: 02/08/17Follow Ups:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: