|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
69.142.46.247
In Reply to: RE: Thanks, I'll keep it in mind! (nt) posted by Triode_Kingdom on May 03, 2021 at 12:41:06
6AB4 (1/2 a 'T7) μ = 60 and 6GK5 μ =78.
Eli D.
Follow Ups:
Those appear to be significantly less linear than the 6BN4 - probably OK in a cathode follower or cathodyne splitter as long as the quiescent current is high enough.
The rating for "heater negative with respect to cathode" is a problem for the majority of possible subs in cathodyne service. With +400V B+, voltage on the cathode of the splitter will be around +100V DC in addition to 60V AC pk-pk signal. It's not clear to me yet whether I'll elevate the heaters in this driver. In any event, I don't see much reason at this point to look for a different tube type. I have a decent stock of 6C4, and this tube has proven it's capabilities in this service in many commercial amplifiers. I have bigger problems at hand right now, like aligning 3D dimensions in the various chassis pieces using 2D software. :)
--------------------------
Buy Chinese. Bury freedom.
those are single elements, yes?
Go totally nuts; 6HV5A. mu of 300, gm of 65 mA/V...not a 7-pin though...LOL
cheers,
Douglas
Friend, I would not hurt thee for the world...but thou art standing where I am about to shoot.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: