|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
82.95.217.48
In Reply to: RE: 38H OPT for 845, so so? posted by walge on April 10, 2021 at 13:02:18
Actually, this rejected transformer causes problems in a tube circuit.
And the real answer is no, we couldn't find the problem if we used an AP or ARTA because of their bandwidth limitations. Fine equipment in itself but good at other things.
But for that problem we could have used a scope and some other skills. Just out of curiosity I made a frequency curve.
Follow Ups:
This is a SE transformer 3500 Ohm tested with a EL34 in triode mode. Kathode bias and the low frequencie is a bit limited by the electrolitic capacitor.Would be nice to have a 10dB NF and see what happens, 3Hz -300kHz must be possible for SE. With a 300B even slighty better.
Edits: 04/11/21 04/11/21
Please decribe the test set up.
will buy this trafo for my test, please send details.
PS= it is funny, you show a diagram of one trafo seems to be fine but, then after my request to buy it, you wrote that this one got problem in a circuit.
It is a joke?
Something strange.
I repeat I am ready to buy your OT, to verify with a certified test set.
Walter
Walter,That was just a example of a transformer ( pp 5k) and what could be wrong and what happens if the test equipment has limitations. That perticular transformer i don't have anymore, it went in the trash bin.
The latest picture i posted of the 3500 Ohm SE i can make but not for sale, as we all know, i don't sell here anything. So don't send pm.My test equipment is good enough, the "certified" (what ever that means) test set would not make any differance.
Edits: 04/11/21
Ok, I understand.
At the end of the story you can't give any addtional specs or photo on the stuff you mentioned.
It seems a virtual world.
If I have the OT like you description I will be in hurry to sell them!!!!!
In attach the photo of two OT for SE, on the left is the one custome made from F.I.A.T. Roma for me, it is double C, 0,01mm, with a classical bell, for 300B s.e. Involved in a circuit the performance are good and the sound very fine.
The other is the one I spoke before, comes from Onori always in Italy, amourphos, 0,023 mm.
As you see I show the stuff I am speaking, this make a great difference.
Last, the AUdioreview magazine is insithe EISA so the test set is compliant with worlwide dierection.
Bye
Walter
Ohh, you like pictures of my projects?
The differance between you and me is that I actually design transformers.
Edits: 04/11/21 04/11/21 04/11/21 04/11/21 04/11/21
Good!
It is possible to buy or not?
not allowed here Walter
Ok
If not here
Where?
Just friends.....
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: