|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
108.23.95.230
In Reply to: RE: how to connect transformer posted by dave slagle on March 09, 2017 at 19:43:12
Dave,
Thanks so much!! So 1 and 4 both get the hot side and 2 and 3 both get neutral, correct?
Out of curiosity, is that center marking a standard sign for neutral? I haven't seen that before?
Follow Ups:
I didn't ever say to do that.... I guess the next thing I should say is get an ammeter, variac and a fuse since the hookup you described mayl draw a lot of current and cause some sort of failure.
You haven't stated what voltage you are trying to wire it for so I will say it again.
first confirm continuity of the wires and that 1&3 are a pair and 2&4 the other.
For 115V operation connect 1&2 for hot and connect 3&4 for neutral
for 230V operation 1 is 0V 3 gets connected to 2 and insulated and 4 is 230V/
dave
The marking in the center isn't a symbol. It's just showing how the wires from terminals 2-3 connect to their respective windings.
--------------------------
Buy Chinese. Bury freedom.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: