|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
65.219.130.162
In Reply to: RE: Power amplifier posted by REL54 on October 28, 2007 at 05:41:59
Hi,Did you notice that C112 is already at the junction of the R10 and R12 to ground?
My take is different - that C112's 100 uF is much too high a value of capacitance for this use-point. It will sound stodgy and slow. I would like to try just the minimal capacitance to do the job.
I'd like to see, at the very MOST, a 20 uF value film at that point, not 100 uF, In fact, I would start with only a 4 uF film cap there first, bypassed with another .01 uF film cap, Dynami Caps in both cases. I am listening to that exact value / type combination, as I type this post, and it sounds quite good to me. :-)
Jeff Medwin
Edits: 10/28/07Follow Ups:
I was looking at C112 as being at the juncture of R10 and R4 but actually you're correct. Wouldn't hurt to put one between R10 and R12 but..........
I agree with you about 100 being too much. 22-25 is plenty I'd think.
Thanks for pointing out my oversight.
roN
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: