|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
76.126.9.49
In Reply to: RE: Want a RTR;Recommendations posted by Dave Pogue on October 16, 2015 at 08:53:00
I have a 5050 BIII and it has a much better set of reel holders than the older models. I looked at a BII, and the reel holders were very difficult to use. I was lucky to get my BIII a few years back from a fellow who had bought out the inventory of an old radio station, including a bunch of different decks. I would definitely look for one that can play 1/2 track, 15ips, in addition to 1/4 track 7.5ips and both NAB and CCIR EQ, so you can play both older 1/4 track 7.5ips commercial prerecorded tapes that use NAB EQ and the new 15ips 1/2 track tapes that almost all feature CCIR EQ. The Otari 5050 BIII does that. If you bypass the electronics for a new pre pro (which I have for my other machine a Technics 1506 with Bottlehead prepro) then you don't have to worry about EQ, since the new prepros all (?) have both EQ's. A $2K budget for a near mint machine is possible, but not one with a new prepro.
Larry
Follow Ups:
I thought the B-II/2 and the B-III had the same reel tables, no?
In any case, the 5050 series from the B2 on can be astonishingly good, have widely available parts, and can be had pretty cheap, particularly if the cosmetics are a little rough.
WW
"A man need merely light the filaments of his receiving set and the world's greatest artists will perform for him." Alfred N. Goldsmith, RCA, 1922
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: