|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
199.167.153.177
In Reply to: RE: If you are worried about the tweeter failing posted by Ralph on February 24, 2017 at 10:09:18
HERE ARE the specs of the 3 way crossover and super bullet tweeters i my buy-
Universal 3-Way Crossover-
Crossover frequencies are based on 8 ohm load. an 8 ohm speaker may vary from 7 to 15 ohms or more. Four selectable crossover frequencies: 800, 1600, 5,000, and 7000 Hz. Each speaker element has two options.(with standard 6 dB/octave
attenuation). Here are the 2 possible combinations for Tweeter(letters are labels of terminals.):
5000 hz (E) 7000 hz (F). Crossover handles up to 100 watts of audio power (maximum music power).
Super Bullet Tweeter, 300 watts, 8 ohms-
Power Rating Watts 800W Music Program 1600W Resonance 25Hz Usable Frequency Range 40Hz-800Hz Sensitivity 97 Magnet Weight 109 ounce,Voice Coil Diam. 4-Inch, Resonant Freq. (FS) 25Hz DC Resistance.
Follow Ups:
Will the 4 super bullet tweeters wired to this crossover have a longer life than if only 1 of same tweeter was wired using 500 watt receiver based on those specs? OR should i buy a new crossover? Thanks for replies.
Usually tweeters only handle a few watts.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: