|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
70.190.187.25
In Reply to: RE: Not with any version of Picore on my Digi+ Pro posted by Batman on April 18, 2017 at 16:27:13
I think you are right about the Digi+ Pro not being compatible with WiFi [RPi's Internal WiFi]
I just got WiFi working with a Dongle using DietPi by editing a couple of files.
Bypass internal WiFi card and use your own WiFi Dongle
Do not configure WiFi in the Diet-pi GUI. Instead navigate via SSH to
/etc/wpa-supplicant/wpa_supplicant.conf
Then add your network name and password. The file should look like this...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
ssid="network-name"
psk="network password"
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Next navigate to;
/etc/network/interfaces
Then uncomment the line for hotplug wlan interfaces.
Reboot.
Dynobots Audio - Music is the Bridge Between Heaven and Earth
Follow Ups:
I;ll try it after I get a backup SD card, in case I brick my RPI.
But this fix doesn't enable me to move the pi around the house since it will always try to find one SSID?
Don't understand
You can move the Rpi anywhere you want when on WiFi provided you get a signal.
Also you can't 'brick' a Rpi....the whole OS is on the flash card, if it does not boot just re-flash it.
Dynobots Audio - Music is the Bridge Between Heaven and Earth
Dont these lines set a single ssid? all my extenders have different ssid's
network={
ssid="network-name"
psk="network password"
}
Your SSID is your router name
All your wireless devices have different IP's
This merely connects your RPi to your wireless network by first identifying the correct SSID or router name and then by using the correct password.
Dynobots Audio - Music is the Bridge Between Heaven and Earth
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: