|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
198.27.242.3
OK, so the 24.000 mAh battery pack lasts about 48 hours. Power indicator goes from three lights one light in about 12 hours so once it's indicating two lights it's time to think about a re-charge.
And....
Takes a LONG time to re-charge a 24,000 mAh battery on a cell phone charger!
Follow Ups:
Should be easy as there is a standard Plugin for it.Cut-Throat
Edits: 04/11/17
Or listed on LMS.
Where did you find it?
If you go to the LMS Web Control Page > Then Settings> Then Plugins Tab > Then you go to 3rd Party Plugins (You may have to click a button called 'Show 3rd Party Plugins.... You'll find it.
You'll then find the Real Beauty of LMS --- The cadre of worldwide developers that keep it above the rest of the herd.
Cut-Throat
Thanks!
Now, wait until you discover the 'Don't stop the Music' Plugin!
Cut-Throat
Dawg, just received the Mad Scientist Heretical carbon fiber digital cable from New Zealand today. Going to get her plugged in to the Connect tonight and have a jam session. Will keep you posted.
Will
made from Belden 1694A?
$18 plus shipping. :-)
Probably the same, but I am a sucker for esoteric stuff! I almost bought the BJ cable but the Devil took over. Still might get the Oyaide DR 510.
Will
...these USB batteries are essentially switch mode power supplies.They typically take a nominal 3.7v Lithium battery and incorporate a boost converter chip (switching power supply circuit) to increase the battery voltage to 5VDC.
The one thing these USB batteries offer is isolation from the AC mains, but their DC output quality may or may not be any better than a wall wart switcher. In other words, you are not getting 'pure DC' off the battery itself but via the switching circuit.
Typical, but there are several such chips on the market
Edits: 04/11/17
it works
Dynobots Audio - Music is the Bridge Between Heaven and Earth
depending on the wall wart it replaced.
.
Dynobots Audio - Music is the Bridge Between Heaven and Earth
.
I still find audible improvements using a battery source vs. an AC powered wall wart.
They don't take on the same level of "false brightness" that masks resolution in my experience.
I raised this question with the guy who makes Elijah Audio (he makes lots of usb cables that either block the dc power or let you add your own DC into the mix. And his response was "yes there are crappy regulators in those things, but its still better than the power coming from a computer."
I can use it on the $200 SMSL M8A (ES9028Q2M) 'DSD 512' DAC I just purchased on MassDrop.
DAC is for use in the office only, along with the EMO BasX A-100 that I just orderd.
No audiophiles allowed!
But it will give me a chance to play around with up-sampling to high sample rate DSD for the first time.
Doubt I'll be throwing away my multi-bit ladder DAC any time so but ya never know. :-)
With my previous Touch players, I used linears from Welborne Labs and Teradak. With those units, I found roughly equivalent sonic performance vs the battery supply - albeit with greater convenience.
Sounds a WHOLE lot better than the Wall Wart that came with it.
That said, a $60 LPS likely will beat it.
rotation given I have three batteries. There's always at least one with a charge. :)
Takes a LONG time to re-charge a 24,000 mAh battery on a cell phone charger!
I had the same issue charging Anker 20100 "batteries" with an old charger I had to hand but now get much faster times with the device Anker recommended - see link.
D
Got one of these on order, should arrive tomorrow.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: