|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
71.163.180.237
In Reply to: RE: In addition to what Ralph said. posted by djn on April 13, 2020 at 20:08:59
Just realized that in many cases, if not most, you can just de-solder, install a piece of heat shrink to cover the exposed joint, then re-solder and use the heat gun. No need to install so many stand-offs.
Follow Ups:
Hi Lew. Working in the shop today I found a can of Plastic Dip and wondered if I could just paint the bare joints with this stuff. I called the company and they said once dry it can stand temperatures of 200+ degrees then I called a shrink tube company and they said the same for shrink tube.
I think I will just paint the bare joints with Plastic Dip. Thoughts ?
Good idea. Those connections are on the cathodes, which could have high voltage though. I would think that Plasti-Dip would have a high enough insulation rating (certainly better than the current situation), but I wonder that if you shortened the resistor leads also, if they'd be more mechanically sound.
Cory
Good point Lew.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: