|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
109.131.64.26
In Reply to: RE: One More Thought posted by Inmate51 on June 06, 2017 at 07:38:35
Well, you gotta put the xover SOMEWHERE... :) these are three way speakers. Think Klipsch LaScala with better everything. I think having a single driver (compression driver covering 400-6KHz is a good thing. Then therés (folded)horn loaders bass, and tweeter from 6KHz>>top. I don't see how I could cross lower... 400Hz is already very low for a compression!
Edits: 06/06/17Follow Ups:
Ah, I see. Yes, taking a compression driver down to 150 Hz is not a good idea, unless you enjoy replacing diaphragms.
This actually gets to one of the basic problems with such speaker systems. A 12" or 15" woofer should not be running up to 500 or 1000 Hz. Too much mass, and, the transition from it to the midrange driver doesn't match well dispersion-wise, resulting in acoustical problems with the reverberant sound field.
:)
I have Altec 9846-a. Horn is 511-b and the woofer is 411b crossed over at 500Hz. Beautiful integration of both. Horn and the woofer are so close to each other, 9846 is considered a point source acoustically.
<
It depends on the woofer and the horn. A pretty good assumption, generally, but there are exceptions that can be measured and simulated.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: