|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
38.88.166.50
In Reply to: RE: Help Building Zu Essence Clones.. posted by marc g. on March 23, 2017 at 16:12:01
hehehe it certainly does, nice find... I am surprised there is no bracing... looks like 1 inch material VS 3/4?
You see the illustrated pyramid, they are depicting? this is made from high density foam on my Omens,I am not sure how I am going to make this yet. A trip to Micheals may be in order. I have cut high density foam with a hot ni-chrome wire anyhow, but I wonder how critical it is to get the exact same material they used..
I believe the platform of the base of the pyramid is vented with four 1/2 in slots around the edge of the perimeter of the pyramid..
thanks for the image!
J
Follow Ups:
I'd love to see the parameters on their custom 10" drivers. Some years back I made a rough try at the Druid with the original Eminence B102.
The current stock B102 with lighter magnet has less extension and less midrange sensitivity. It could still work with a sturdy tweeter and was the basis of one Klang & Ton project.
Zu's 10 varied in weight - did it also vary in Qts?
I liked my fake Druid quite a bit and could see how the real thing would be good.
is the foam pyramid superior to simple fluffed polyfil? does it have any negative effect on effective enclosure volume?
Old B102 and effects of base gap
Old B102 vs current B102
Karlson Evangelist
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: