|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
81.233.250.186
In Reply to: RE: New measurements posted by pix on March 17, 2017 at 05:32:28
Next I wanted to replaced the bass woofer with a power resistor (wirewound).
But just to make sure the resistor itself did not caused any inducive phaseshift I first hoked it up to ARTA/Limp
As you can see the resisor measure a fairly straight line, which is good.
Follow Ups:
Finally, I measured the speaker impedance with the wirewound resistor instead of the bass woofer (the filter intact) and the lines looks allmost as good as the ones you showed me earlyer ;o9
The slight stepp upp below 350Hz is probably caused of the wirewound resistor, being 10 Ohms and not 8.
Clearly all those valleys and peaks are all gone, so the abnormalies must derive from the bass woofer/cab
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: