|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
222.166.2.201
the + 2 stand for ?
Do they refer to 2 line output of subwoofer? What are the difference between these 2 subwoofer channel ? One for left and Right ?
TIA
Alan
Follow Ups:
I disagree with their numbering scheme, but who cares...I don't count derived channels myself. If you want more than 7 amps, typically have to supply your own.
As Chris says, it's for 2 subs. They have typically done a great job for integrating 2 subs. Usually before you had to buy an extra device to integrate two subs smoothly: it's about smooth bass throughout the listening area, not about more bass per se (and not about "stereo bass")...making the sweet spot less a spot and more an area.
remember, LFE are omni directional and not really 'channel specific'. People like to run a pair of subs and so this is an easier way to do it.
Obviously, the 6th and 7th channels are the 'side effects' channels.
Chris
1. the same (i.e., internal Y-connector)
2. semi-independent (i.e, the same LFE/rerouted bass signal but with independent settings for level, distance and, possibly, EQ)
3. independent or stereo (i.e., derived separately from the main L/R channels)
Type 1 is most common.
Type 3 is most rare.
Type 2 is becoming more common and is, probably, most generally useful.
Kal
the 2 rear (back) channels, 2 front-height channels or 2 front-wide channels. This is in addition to the regular 5 channels: left-front, center, right front, right (side) surround and left (side) surround.
Kal
A nine year old NAD receiver I now use in the bedroom has SUB1 and SUB2 outputs. That just obviated the need for a Y-adapter when using dual subs. :)
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: