|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
107.77.111.75
In Reply to: RE: Question about dynamic range and IC electrical parameters posted by 3+4=5 on February 02, 2017 at 10:44:54
PRAT, or several other mysterious things we seek and which have no scientific analysis nailing down HOW it is achieved.
I would think for dynamic range, perhaps a better way to explore would be things that constrict it?
Understanding those might give a general sense of WTF is going on.Certainly devices are used all the time which constrict dynamic range (in CD mastering etc)
Follow Ups:
The lower the resistance, the more dynamic range, or better electricity flow, you are going to get.
So that ties in nicely with "things that constrict".
One of the other posters mentioned measuring the cable. Give it a try when you have a chance. Use a DVM and test the resistance from cable centre on one end to the centre at the other end. Also do the same with the outer collars.
Then do the same with your older cables.
Be interesting to see how the measurements compare.
Cheers!
Jonesy
"I know just enough to get into trouble. But not enough to get out of it."
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: