|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
76.18.66.70
In Reply to: RE: DIY interconnects with DH Labs White Lightning Cable posted by krankkall on December 26, 2016 at 07:36:08
Actually, they came out quite nice.
I put black and red heat shrink on the end of both ICs also.
In physical appearance, the raw cable itself reminds me a lot of Belden 1505A.
Steve
Follow Ups:
One point I would make is that all three of the cables you have mentioned use different conductors for the Pos and Neg legs of the cable. The signal is a voltage potential between the two conductors so it makes sense to me that the two conductors should be identical. Those cables use a wire for the positive conductor and use the braided shield for the negative. Those two conductors have very different electrical characteristics. I just don't see why most cable manufacturers don't recognise this fact. I notice that DH Labs Pro Studio cables are constructed as I suggest. There are two identical conductors within the cable and there is also a shield. Anyway, thanks for bringing the DH Labs cables to my attention. I am going to make a pair of cables using the Pro Studio.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: