|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
69.123.159.151
In Reply to: RE: Simaudio 700i posted by Luminator on June 19, 2017 at 20:48:04
Thanks for the info! I had no idea that fuses made such a difference!
Follow Ups:
To recap, the Simaudio 600i has just one fuse. Moreover, it is externally located, right next to the rear panel On/Off rocker switch. Thus, you don't have to open the chassis, in order to access the fuse. All you need is a small flathead screwdriver.My 600i is a few years old. It utilizes a large, 32mm, fast-blow, 5.0A fuse. Current-production 600is may use a 6.0A fuse, so check the manual and the OEM fuse itself.
Off on a tangent, I'm currently reviewing Simaudio's 820S outboard power supply, which uses two fuses. I just finished reviewing its " F1 " fuse. Those are the small 20mm types, but you can get an idea, about what some of the brands/models do.
Because the Simaudio gear has enough resolution, things like fuses do have an influence. But only you should decide if those sonic changes are for better, worse, or quid pro quo.
Edits: 06/20/17
As always, nice work -Lummy.
Beautiful pics as well, is the gear in your your pics a current set-up?
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: