|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
67.244.183.127
In Reply to: RE: spades posted by kamco on March 05, 2009 at 19:39:14
spades
Follow Ups:
You can always remove the existing screw, then use a stud screw and a couple of jamming nuts. I know this method is introducing additional components but it's a quick/temporary fix without grinding anything.
Essentially you are building a spacer to raise the connection above the plastic fins. Might have to use more than one jamming nut, or maybe some sort of copper pipe spacer/washers.
Some of the binding posts you can buy can also screw into the existing hole. Just by removing the bottom nut that normally jams them against the chassis. Actually, I think Mitchell makes some for this very purpose, but I cannot find any pics for you on the internet.
See my (top view) drawing attached as attempt to explain.
Cheers,
Jonesy
Unless you are very carful you might invite a shorting event if they should loosen. The lugs will be very close to each other. I suppose you could use some electricians tape to isolate them, but........
especially if using the taps right next to each other.
Cables sure look meaty as well and could loosen the assembly fairly quickly.
Proceed with caution I guess.
I have screw terminal strips on my ARC D70.
Admittedly I had to file down my spades to make them fit. Mind you I self terminated my cables, had access to a solder pot and everything at the time.
If factory terminated cables I don't know if I would have filed them down. It would have seemed taboo. Preferring instead to leave them "stock".
Probably would have changed out the strips for binding posts, knowing that I could always return the amp back to the stock strips if I had ever wanted to.
Cheers,
Jonesy
why would makers of high quality gear even put little tiny cheap screw terminals on their amps? Especially mcintosh! With all the high end cables out there terminated in fat spades or banana plugs... amp makers that use those damned little screw terminals must be giggling to themselves as they install them. They have to know that a customer who's spending $5000 or more on an amp probably already owns expensive speaker cables terminated in spades or banana plugs.why why why
It's rediculous.
Edits: 03/06/09
Who knew what was coming?
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: